You can test to make sure that the following components are working correctly and are not the source of the issue: When you troubleshoot issues with a hard drive dock or duplicator, there are some quick tests that you can complete to rule out potential problems. For more information, refer to the documentation provided by the manufacturer. On other drives, there are markings on the circuit board for CS, MA, and SL, which means a jumper shorts the pins vertically in that position. On some drives, the jumper diagram is on the label that is on the top of the drive. There is no standard position for the jumpers on IDE drives. If Master is not working, try using the drive in Cable Select. When it does not mention what IDE drive configuration is required or if there is only one drive in the setup, the drive should be configured as Master. A jumper is a small plastic piece that slides on top of two pins to electrically short them together. The jumpers switch the drive between Master, Slave, and Cable Select for most drives. If you are unable to detect your IDE (PATA) drive using a product, you may need to change the jumper settings on your drive. Note: If you are using an IDE hard drive 1 Gigabyte in size or smaller, refer to the following FAQ: Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK comes ready for Australia and New Zealand only when you buy in Australia and New Zealand
#Usb to ide sata standalone hdd hard drive duplicator dock drivers#
OS independent No software or drivers requiredįor duplication, the destination drive must be of equal or greater capacity than the source drive. Large capacity drives (tested with up to 4TB 3.5" and 1TB 2.5" drives per bay) can be used to greatly enhance your computer's storage/backup capabilities.Ĭontained in a small form factor design that makes it a suitable addition to desktop and laptop operating environments, this hard drive duplicator/external HDD docking station is a versatile storage and hard drive cloning utility that also features a host of other built in utilities that are accessible via a built in menu system.Ĭurrently tested with up to 4TB 5400 RPM hard drives per bay (8TB total) and 1TB 5400 RPM 2.5" hard drives (2TB total) Or the docking station can even be used to quickly erase hard drives, for reuse in the future.įunctioning as a universal IDE and SATA HDD docking station, the hard drive duplicator can be connected to a computer through USB with support for simple plug-and-play installation, allowing users to access hard drive contents without having to mount in an external drive enclosure or open the computer case for conventional drive installation. Supporting both IDE and SATA, this universal duplicator dock enables duplication from SATA to SATA, IDE to SATA or SATA to IDE, and IDE to IDE, as long as the source drive does not exceed the size of the destination drive. A built in LCD screen then allows for tracking the duplication progress, as well as reporting errors on the drives.
![usb to ide sata standalone hdd hard drive duplicator dock usb to ide sata standalone hdd hard drive duplicator dock](https://i.ebayimg.com/images/g/-NoAAOSwjYZhG~3q/s-l225.jpg)
![usb to ide sata standalone hdd hard drive duplicator dock usb to ide sata standalone hdd hard drive duplicator dock](https://media.startech.com/cms/products/main/unidupdock.main.jpg)
Providing quick, yet complete hard drive cloning functionality, this universal dock can operate as a standalone HDD duplicator with no connection to a host computer, delivering an exact 1 to 1 clone of the target hard drive including partition and boot sector information, the Host Protected Area (HPA) as well as user data at a copy rate of 72 MB/sec. The UNIDUPDOCK Universal SATA/IDE Dual Hard Drive Duplicator functions as both a convenient solid state (SSD) or hard drive (HDD) copying/imaging solution or an external SATA/IDE SSD or HDD docking station for 2.5in or 3.5in drives (SATA, SATA II, SATA III).